Easy Bangles-Making

Making your own accessories is easy! All you need is five trendy beads, six with holes large enough for your 15g wire, round and chain nose pliers, 18g wire, wire cutters and at the end of the eighteen gauge wire. See? With only this, you are ready to make your own bangle.

, so here goes. Cut a piece of wire (15g). Remember not to correct for the way he bent the ideal form of a bracelet. Then, with a round pliers, grip the end of the central part of the wire loop to the opposite direction of the curve the wire. I now have a loop for the head pin.

On the other side, slide beads. You can play with the combination and how you want to just keep in mind that when the beads to stick together until the scope of the wrist. Also keep in mind that if you are working with lampwork beads, then you need to add one and a half inches to your length. Well, if you think that is too much hassle, just try to estimate the length of it trying to put it on. You can fairly gauge the length required.

Now, when everything is all set and to your liking, you can make another loop. With your circle nose pliers, holding the wire after the last grain. Then bend the perfect loop. After that, cut the excess wire. But be very careful with your eyes while using the cutter. Then, even out of the loop.

Making Supplies is easy does not it? So the next bend Bangle in a round shape that fits your wrist and keep the difference between both sides, because this is where you attach the buckle.

There are many types of clasps, but then S-clasp would be more appropriate for Bangle equipment.

This is how you can make your e-clip. You can get a 18g wire and make a loop with round pliers. This is basically the same concept as how you make a bracelet. But let's not live on it a lot. Moving on, after they formed a loop, using pliers, holding the wire and make another loop. This time, it's up and to the right. Then wrap it around the pliers' bottom prong and let go. Then hold the loop up and down on the right. Keep in mind that the loop should be a big loop. Then you wrap the wire around the top prong of the round clamp and connect it to the bottom prong . Then you do a loop and cut excess wire. Remember to be careful with your eyes.

At the end of the buckle to attach hooks to the bangle and voila! You now have your bangle.