Making Jewelry - Wire Wrapping 101

Do you know what is a basic wire working techniques, which is so useful in making jewelry that is well worth taking the time to learn and practice? He is known as a wrapped loop. There are photographs to accompany this article. Can be found at SyZyGy Nakit.Radi link on the page can be found at the end of this article. Go to About Us and more. Under the main menu heading you will find a Wrapped Loop;. Click on the

If you do not know how to solder silver and gold, this is the safest way to connect one design element to another. It will also make a pendant for any bead, make your own chain and produce wonderful earrings that will not come apart.

To begin with, you will need:

1 chain pliers

2 Round nose pliers

3 cutter

4 20 or 22 gauge wire or 3 "Headpins (the wire should be half-seriously)

5.asortiman beads

Chain Pliers (CNP) as needle nose pliers, with no grooves on the inner side of the jaw. This allows you to grip wire without marring it. Round nose pliers (RNP) are two smooth, tapered jaws that are larger by cutting zajedničkom.Za should be semi-flush. The frame joints are better than the joints as you would find the scissors.

I rarely use the Headpins. I love strings, because it is less disruptive, but if you do not like the look of hand-headpin, then by all means, use a commercially made ​​Headpins. It is best to practice with 3 "Headpins because it gives you more work. So, let's begin.

If you use wire instead Headpins, cut a piece that is about 10 "long. Any more and gets a little difficult to manage. Straighten cable. To headpin, grab the wire at one end with the very tips and chain nose pliers. Fold the wire back on itself, but not all. Pinch the end closed the rest of the way with CNP. If the hole in the bead is large, the greater curl. you do not really want the "head" is pulled up inside the grain.

Insert the wire or headpin the bead, bearing in mind that whether or not there at the top and bottom of the grain. You'll need to leave space between the bottom of the loop you're about to and on top of bead to make. Depending on how much you want to make wire wrap, wire it to understand the advice Round nose pliers, or further to the jaw. This is largely a matter of experience and a lot depends on the wire gauge used. Then make a right angle to bend the wire or headpin.

Then, decide how you want your big loop to be completed. For very small loop using round forceps tips. For larger loops, use of the RNP, which is closer to the wrist. Grasp the wire with the RNP, so that one of the top jaw.

Hold Round nose pliers, so that at the end of the wire pointing away from you. Using the other hand put your fingers near the RNP and push the wire toward you across the jaw, which is at the top. Then pull the wire around the rest of the way to the bottom of the jaw stops you.

Slightly loosen the grip on the wire with pliers round, so you can rotate the bottom jaw with the times without losing their place along the jaw. Finish getting the wires all the way around the jaw. You may have to pull some strings to the side to pass the bead.

Remove loop from the pliers and inspect for symmetry. Everything has to be at right angles to each other. Also, the loop should be directed to the shaft of the wire as it is held to the bead. If you do not loop in the center, re-insert the round jaw pliers until it stops, grab the loop with the pliers and roll the hand away from the excess wire to the loop at the center. Correct the excess back to the right angle.

Then, using the chain nose pliers, grasp the loop with the excess wire up.

Keep the loops tight, and on the other hand, working away the excess wire around a short wire loop and the top of the ball. Work slowly and steadily, so you get the trim right next to each other. Speed ​​can be your enemy here.

When your latest film touches the top of the bead, stop. Use your cutters to cut the excess wire from the rest of you better možete.Riječ šikare.Strana the semi-cutting pliers, which is smooth and straight cut with the smallest točke.Strane (pictured at the beginning of this article) that the angle will produce the greatest point at the end of the wire. So it is best to have a flat side facing the cutting wire that will stay with an angle toward the side of "waste" of wire. Use chain nose pliers gently squeeze the end of the wire into its final position. Run your finger over it to make sure that it will not push or scratch the wearer. <[/ P>

Voila! You've made your first wrapped loops. You are well on your way to creating beautiful jewelry. Last thing to remember is practice, practice, practice. Do not expect to do perfectly the first time or even seventh. No, not stick to it. As I said at the outset, this is one of the most valuable wire wrapping technique that you can learn.

Read More >>

Safety Wire

This guide will show you how to properly use a safety wire. Several security organizations require wires, including FAA, FIA, SCCA, NHRA, and many others.

Most of the security wiring varies by 0.020, 040 in diameter. For most applications consist of stainless steel or Inconel, although copper and other metals can be koristiti.Dvije main purposes of safety wire are:

1 Retain bolts and components from falling off the vehicle in case of failure.

2 Prevent closures due to depart from vibration or other environmental reasons.

Several chemical compounds, as well as a nylon nut to advertise the same claims. Although these products are excellent in preventing back out, they did nothing to keep failed components. Also, products are becoming ineffective at high temperatures.

drilled bolts for safety wire

The first step in a safety harness any of drilling holes for wires to pass. Due to corrosion issues I only recommend drilling stainless steel, titanium, aluminum or screws. If these materials are available and advise finding a pre-drilled screw properly treated after drilling. Regular screws and bolts are pretty straight forward. You'll be sure and drill the smallest hole that will allow your gauge wire to pass through them. While drilling you should use a lot of cutting fluids and go slowly. There are jigs for it, but I suggest you make your own vice jaws with a small piece of soft wood, and an additional screw. Banjo bolts require a special procedure with regard to the fact that they are hollow.

Drilling banjo bolt for safety wire

beginning banjo bolt drill to drill a shallow hole almost at one of the corners as it will appear above in red. Then turn 30 degrees and drill a little deeper into the hole as shown above in blue. At the end of another 30 degree turn. This time drill all the way through as shown above in Chartreuse. Below is the finished screw.

Banjo Bolt

In this example we will assume that you want to wire the two screws and banjo fitting together. First, measure the distance between all points of attachment. No point should be more than 5 "in spite of the total distance should be less than 20". In this example, all 3-point 3 "total. Take the total distance and multiply it by 3 to a length of wire you need. So in our example I started with a 9" wire. Start by threading wire through the first screw and bending back on itself in the middle as shown below.

Security Wire

with wire pliers twist the approximate distance to the next along the screw as shown in the following sliku.Broj turn, you will need depends on the gauge strings you use. It usually occurs in the wire frame will be označene.Jednostavan how to count to know how many twists twists every pull its calipers čini.Postaviti and use it to make three twists per pull. Assuming that I wanted 9 twists per inch, and I had one inch to cover, I'd pull the lever 3 times. For two inches would pull the lever 6 times.

Step 2

Now, none of the wires leading through the next bolt. You will want to do it in a way that the wires do not want to tighten the bolt to loosen. Now twist the next segment leads to the third bolt.

Step 3

Now, thread wire through the last bolt and twist the rest of your strings. About half an inch past the last bolt you can trim off the excess wire and bend the wire down to sebe.Razlog why pigtail wire to prevent the stabbing with it later.

Read More >>