Quality Glass Fusing Supplies

pieces of glass are joined through a process of fusing glass. Glass partial melting at high temperatures, and then joined to another dio.Električni furnace used to heat and melt the glass pieces and soldering with water joined together. Glass fusing supplies can be very expensive if you do not know the right place to look.

fusing technique used

Typically, thin layers of glass layered one on top of other colors and can be used to create different patterns. This is known as stacking. This stack is then located inside the electric furnace and heated. Finally, the pieces are joined, and the temperature was then brought down quickly to avoid devitrification.Carinsko pieces can then be cooled over time, and while it soaked into the precise temperature that is very important for annealing. This is done so that there is no uneven cooling and breakage occurs in the product.

fusing supplies

fusing glass supplies can be expensive if you compared prices from several stores. If you can not find a store near you, then you could look for one online. You can compare prices of different suppliers of glass fusing. If you are a beginner, May start by buying only essential items. For beginners, here is a list of things that May be you:

The most recent Pliers: These pliers are used to reduce the ionic glass on the number of pieces - as much as you want May. These pliers are very useful when you have a small area that needs to be usitnjeno.Uska and curved lower jaws fusing devices can access tight places and provide enough leverage, so you can get a clean break.

Cutter Oil: Glass cutters chamber that can today be filled with oil. Earlier cutter had to be dipped in oil and then used for slitting. The type of oil used is of course a personal preference. You can use kerosene, motor oil, oil stove, oil lamps, or any oil of your choice.

Fuses Glass: You can find these in various types and sizes. Get a compatibility test done before you use glass.

glass cleaner: You need to be aware of how to clean fused glass. This will give a good finish on your product.

glass cutters: Look for a good glass cutter on the market. There are many different types available. Find one that is convenient to use.

Glass Pliers:. You could choose between running pliers grozing pliers combination pliers and much more

Glasses / Goggles:. This fusing glass supplies are needed to protect your eyes when working with glass, so you can avoid debris from harming your eyes

furnaces: This is the most important part. You have to melt the glass to be joined.

a dust mask:. This is used to limit any glass dust to enter the respiratory system

Other fusing material may include items such as high temperature gloves, kiln shelves, Haik brush, books and tapes, fusing gloves, kiln furniture and much more.

Read More >>

Making Jewelry - Wire Wrapping 101

Do you know what is a basic wire working techniques, which is so useful in making jewelry that is well worth taking the time to learn and practice? He is known as a wrapped loop. There are photographs to accompany this article. Can be found at SyZyGy Nakit.Radi link on the page can be found at the end of this article. Go to About Us and more. Under the main menu heading you will find a Wrapped Loop;. Click on the

If you do not know how to solder silver and gold, this is the safest way to connect one design element to another. It will also make a pendant for any bead, make your own chain and produce wonderful earrings that will not come apart.

To begin with, you will need:

1 chain pliers

2 Round nose pliers

3 cutter

4 20 or 22 gauge wire or 3 "Headpins (the wire should be half-seriously)

5.asortiman beads

Chain Pliers (CNP) as needle nose pliers, with no grooves on the inner side of the jaw. This allows you to grip wire without marring it. Round nose pliers (RNP) are two smooth, tapered jaws that are larger by cutting zajedničkom.Za should be semi-flush. The frame joints are better than the joints as you would find the scissors.

I rarely use the Headpins. I love strings, because it is less disruptive, but if you do not like the look of hand-headpin, then by all means, use a commercially made ​​Headpins. It is best to practice with 3 "Headpins because it gives you more work. So, let's begin.

If you use wire instead Headpins, cut a piece that is about 10 "long. Any more and gets a little difficult to manage. Straighten cable. To headpin, grab the wire at one end with the very tips and chain nose pliers. Fold the wire back on itself, but not all. Pinch the end closed the rest of the way with CNP. If the hole in the bead is large, the greater curl. you do not really want the "head" is pulled up inside the grain.

Insert the wire or headpin the bead, bearing in mind that whether or not there at the top and bottom of the grain. You'll need to leave space between the bottom of the loop you're about to and on top of bead to make. Depending on how much you want to make wire wrap, wire it to understand the advice Round nose pliers, or further to the jaw. This is largely a matter of experience and a lot depends on the wire gauge used. Then make a right angle to bend the wire or headpin.

Then, decide how you want your big loop to be completed. For very small loop using round forceps tips. For larger loops, use of the RNP, which is closer to the wrist. Grasp the wire with the RNP, so that one of the top jaw.

Hold Round nose pliers, so that at the end of the wire pointing away from you. Using the other hand put your fingers near the RNP and push the wire toward you across the jaw, which is at the top. Then pull the wire around the rest of the way to the bottom of the jaw stops you.

Slightly loosen the grip on the wire with pliers round, so you can rotate the bottom jaw with the times without losing their place along the jaw. Finish getting the wires all the way around the jaw. You may have to pull some strings to the side to pass the bead.

Remove loop from the pliers and inspect for symmetry. Everything has to be at right angles to each other. Also, the loop should be directed to the shaft of the wire as it is held to the bead. If you do not loop in the center, re-insert the round jaw pliers until it stops, grab the loop with the pliers and roll the hand away from the excess wire to the loop at the center. Correct the excess back to the right angle.

Then, using the chain nose pliers, grasp the loop with the excess wire up.

Keep the loops tight, and on the other hand, working away the excess wire around a short wire loop and the top of the ball. Work slowly and steadily, so you get the trim right next to each other. Speed ​​can be your enemy here.

When your latest film touches the top of the bead, stop. Use your cutters to cut the excess wire from the rest of you better možete.Riječ šikare.Strana the semi-cutting pliers, which is smooth and straight cut with the smallest točke.Strane (pictured at the beginning of this article) that the angle will produce the greatest point at the end of the wire. So it is best to have a flat side facing the cutting wire that will stay with an angle toward the side of "waste" of wire. Use chain nose pliers gently squeeze the end of the wire into its final position. Run your finger over it to make sure that it will not push or scratch the wearer. <[/ P>

Voila! You've made your first wrapped loops. You are well on your way to creating beautiful jewelry. Last thing to remember is practice, practice, practice. Do not expect to do perfectly the first time or even seventh. No, not stick to it. As I said at the outset, this is one of the most valuable wire wrapping technique that you can learn.

Read More >>

Useful Construction Hand Tools Crafted by Leading Manufacturers

Hand tools come in different forms and has different uses. It can be used to drill holes, cut pieces of wood, metal or plastic slice. These are very useful in any industrial building. Users trust only the leading manufacturer of quality, accuracy and precision.

Denali, DeWalt, and Stanley just a few of the leading manufacturer of construction hand tools in svijetu.Denali tools are made ​​through an extraordinary combination of quality workmanship and loaded with professional grade značajke.Kupac value of feedback.

DEWALT Construction tools are well designed and heavy duty to last longer. I take pride Stanley tool to exceptional quality, durability, ergonomic standards, and reliability.

Some of the benefits of building popular hand tools:
Denali 18 Volt Cordless 3/8-inch Drill / Driver Kit-582 146

Drill Kit at 18 V, wireless and 3 / 8 inches from the Denali is boasting high quality design and functionality. It has a powerful 2-speed motor with a battery. It can rotate 360 degrees. Powerful engines allow for high performance levels of F and has a brake which makes drilling and screw lightly.

24 torque settings and drill to prevent stripping of screws. A 2 on board bubble level with the plane drilling. While Jacobs keyless chuck from 3 / 8 inches is beneficial to provide quick and easy bit changes.

handle drill has an ergonomic design and is molded with a soft material. This means that the process could provide a more compact, comfortable grip. A workout using two Denali 18V batteries.

Denali 582 146 38 Drill comes complete with two double-ended screwdriver bits, and the board of pohranu.Kit also includes a battery of Denali and nylon bag. It carries a 1-year warranty and weighs 11.2 pounds.

DEWALT Heavy Duty Palm Nailer-D51180
DEWALT D51180 is a lightweight but heavy-duty palm nailer. This can drive fasteners lako.DEWALT nailer also has a metal casing. It's tough to withstand any kind of abuse the site.

This is a comfortable leather grip to reduce vibration. It is also slip-resistant to prevent accidental kapi.Zakivač also has a magnetic tip. This allows the nail accommodation in tight spaces with ease.

nailer operates at 70-120 psi pressure, and has a diameter of 6d-16D standard. It comes with oil, fitting 1/4-inch, and goggles. It is difficult £ 2.65.

Stanley 9-inch needle clamp-MaxGrip 84-887
Pliers with maximum traction is believed to be highly functional, heavy duty and specially designed to perform effectively Stanley Needle forceps. This is a larger capacity jaw, along with a parallel jaw movement, kept the materials better.

These pliers Measure 9 inches and comes with a solid steel jaws. This means that the body is made of forged steel alloy. This increases the force and thus exceeds the ANSI standards for the moment.

and special hinge clamp design is useful for cutting, as it provides greater leverage. It also reduces the effort rezanje.Kliješta with ergonomic handle. This two handle material that provides maximum secure and comfortable grip. I wear a hole pliers is useful for easy hanging or tethering.

So this is Stanley 84-887 9-inch MaxGrip Needle clamp supports a limited lifetime warranty.

Read More >>

GBC Premium Oval Hole Spiral Coil Crimpers Review

Summary:

GBC premium oval hole spiral coil crimping pliers (part number 7300551) are some of the highest quality crimping pliers are available in the market.
These special pliers are designed for users who have a spiral coil binding machine or a punch that uses modular oval holes. With oval hole pattern is necessary for the ends of the spiral coil to be wrapped with more throws, so that coils do not spin off the book when the pages are turned.
These pliers to cut and crimp the ends of coils in one go and are an important part of any binding system.

Strengths / Features:

For users who have a coil binding system that produces oval hole, the top coil crimping pliers are a necessity. Standard coil crimping pliers will not consistently produce long enough to prevent the throwing coils of working your way from the edge of the coil bound documents.
The standard coil crimpers to find it for 4:01 and 5:1 pitch round hole spiral binding. However, the coil crimpers are an excellent choice for users who are legally binding documents with other pitches of spiral coil. Users binding documents using a 3:01 pitch spiral coil, using a 3:1 pitch coil with patter Proclick holes or use a 2.5:1 pitch coil with 2:1 pitch binding machine you will want to use the pliers to crimp the end of their documents.
plastic handles of these crimping pliers are designed to make them easy to hold and easy to use. However, it is important to remember that red dot on the crimpers to the ceiling and the spine of the book is facing you.
This coil crimping pliers can also be used with a standard 04:01 or 05:01 pitch coil without looking odd or uncomfortable. This will prevent users from having to own two pairs of pliers coil binding.

Weaknesses / Limitations:

These premiums coil crimpers will cost about twenty dollars more than the standard pair of coil crimping pliers. Although it's not a big amount of money, it is enough that some users consider whether an upgrade is worth. In some cases, and others are not.
Although the premiums for crimping pliers, they really are not any easier to use than the standard coil crimping kliješta.Jedina thing that makes them the premium is the fact that they have more pitching for the oval hole, or even binding resins.
high volume users sometimes complain that the task of crimping over the spiral coil binding spines is tedious and time consuming. These crimping pliers are not helping the problem. Organizations that bind a large number of books May want to consider an electric coil crimper like Marlon crimper.

Recommendation:

for users who need to bind documents using spiral coil oval hole pattern, 3:1 pitch hole pattern or a pattern of land 0.400 coil crimpers are definitely a must.
They work with both standard and specialty types of coils, which makes them a versatile tool and a decent investment. However, it is important to bear in mind that these tongs are easier to use and does not save time over standard coil crimpers.
Thus, users who do not ever plan binding documents with a specialty coils May found that the standard coil crimping pliers are suitable for their needs.

Read More >>

Jewelry Making Basics

The best way to get started with making jewelry with wire bead. Buy a simple basic kit and buy a bracelet jewelry making instruction books that relate to and understand easily.

jewelry making can be time consuming and can be frustrating when first learning, but I think it's very therapeutic as anything, it's so worth it when you can produce stunning necklace or bracelet out of a pile of beads and string and tell people 'I made to'.

the first things you'll need to start making jewelry some beads and wire. Beads come in all shapes and sizes, but the most useful ones will be called a crimp bead. These very small balls safely within your wires in a loop, so you can connect the buckle.

Now the wire is loose concept in jewelry making, because it includes items such as metal wires, and the 'floppy' as the Beadalon wire (metal-coated wire) or fireline (TM) (I liken to the fishing line). You'll also need some tools if you plan on advancing skills of jewelry making in the future or you will get some mighty sore fingers and ruin your kitchen scissors! (* Note:. Some people will tell you that you will need a dedicated space to be able to make your jewelry creations, but it just is not so I started off on the wing with bead board then moved up on my dining room table when my bead stash got a little too .)

You'll also need a special jewelry making pliers, curved nose, I discovered (chain nose) pliers the best thing I can find them more versatile, pair flat nose pliers that look like a smaller version of the regular pair of pliers and a pair of round nose pliers, also you will need a dedicated pair of sharp scissors (did I mention that you are not using your kitchen one?) and a pair of wire cutters. Do not be tempted to clamp the teeth as this will mark the silver wire, you can wrap masking tape around them if you need some grip, and you will need a glossary of basic things such as nodes, wires scales and types of beads as there are some balls you can use the metal wires that are not suitable for use with the Beadalon for example, and that is because sometimes the beads have sharp edges, within which it will eventually wear down the wire.

For me, when I started making jewelry seven years ago, I knew nothing about it. I started with a tiara from the Hobby Craft kit that a friend had bought for himself to do. She could not be bothered with it so I asked if I could go. Presto! I made a tiara. You can, of course, books on jewelry making course in your area that can be a lot of fun and you get to meet like minded people are fantastic, they give you jewelry making supplies you will need and you'll come away with a beautiful piece of handmade jewelry by you made all by yourself.

I will soon be producing papers on the basic techniques of jewelry making and what they mean.

Read More >>

Safety Wire

This guide will show you how to properly use a safety wire. Several security organizations require wires, including FAA, FIA, SCCA, NHRA, and many others.

Most of the security wiring varies by 0.020, 040 in diameter. For most applications consist of stainless steel or Inconel, although copper and other metals can be koristiti.Dvije main purposes of safety wire are:

1 Retain bolts and components from falling off the vehicle in case of failure.

2 Prevent closures due to depart from vibration or other environmental reasons.

Several chemical compounds, as well as a nylon nut to advertise the same claims. Although these products are excellent in preventing back out, they did nothing to keep failed components. Also, products are becoming ineffective at high temperatures.

drilled bolts for safety wire

The first step in a safety harness any of drilling holes for wires to pass. Due to corrosion issues I only recommend drilling stainless steel, titanium, aluminum or screws. If these materials are available and advise finding a pre-drilled screw properly treated after drilling. Regular screws and bolts are pretty straight forward. You'll be sure and drill the smallest hole that will allow your gauge wire to pass through them. While drilling you should use a lot of cutting fluids and go slowly. There are jigs for it, but I suggest you make your own vice jaws with a small piece of soft wood, and an additional screw. Banjo bolts require a special procedure with regard to the fact that they are hollow.

Drilling banjo bolt for safety wire

beginning banjo bolt drill to drill a shallow hole almost at one of the corners as it will appear above in red. Then turn 30 degrees and drill a little deeper into the hole as shown above in blue. At the end of another 30 degree turn. This time drill all the way through as shown above in Chartreuse. Below is the finished screw.

Banjo Bolt

In this example we will assume that you want to wire the two screws and banjo fitting together. First, measure the distance between all points of attachment. No point should be more than 5 "in spite of the total distance should be less than 20". In this example, all 3-point 3 "total. Take the total distance and multiply it by 3 to a length of wire you need. So in our example I started with a 9" wire. Start by threading wire through the first screw and bending back on itself in the middle as shown below.

Security Wire

with wire pliers twist the approximate distance to the next along the screw as shown in the following sliku.Broj turn, you will need depends on the gauge strings you use. It usually occurs in the wire frame will be označene.Jednostavan how to count to know how many twists twists every pull its calipers čini.Postaviti and use it to make three twists per pull. Assuming that I wanted 9 twists per inch, and I had one inch to cover, I'd pull the lever 3 times. For two inches would pull the lever 6 times.

Step 2

Now, none of the wires leading through the next bolt. You will want to do it in a way that the wires do not want to tighten the bolt to loosen. Now twist the next segment leads to the third bolt.

Step 3

Now, thread wire through the last bolt and twist the rest of your strings. About half an inch past the last bolt you can trim off the excess wire and bend the wire down to sebe.Razlog why pigtail wire to prevent the stabbing with it later.

Read More >>

Homemade Lures For Bass Fishing

There are many advantages to making your own lures for bass fishing. Not only will you save a lot of money, but you can customize them in a thousand ways. Different parts are often combined to create a lure and using different colors, weights and sizes that match specific fishing situations, you can make lures that are specific to your fishing situation. Making lures for bass is a good way to make custom designs that can increase your catch, you never know until you try. With this article we will try to offer you five simple steps to make your own lures. Here is what you will need: making bait wire, pliers, inline spinner body, rubber spider skirt, beads, Buzz bait knife, rivet collars

.

Step 1 - stick to 8 inches long ordeal making wire with a couple of jaw needle nose pliers. This wire must be held to max 1 ¾ inches from the end of the wire. At the end of the wire, slide the hook. The final size of hook depends on personal preference and the buzz bait.

2 step - you now need to get the cable around the hook and needle clamp with the second pair of pliers in order to successfully form a loop. Now, you must withdraw without strings end up on the main wire and bend the free end around the main wire so that it will close the loop and hook to secure your place. Now is the time to remove the needle nose pliers.

Step 3 - it's time to slip rubber skirt on in-line spinner body and push it to the wire followed by one / two-color beads, if desired. In this way, it will add weight buzz bait casting and will help the bait to sit in the water at a time when it will reach.

4 step - take your wire and bend 2 ½ to 3 inches above the loop you made in the previous steps at the end of the wire. Take the pliers and use them to bend the wire down to form a ½ inch wide long in shape. You should measure ¾ inches down "U" shaped bend in the wire and bend the wire at a right angle.

Step 5 - Your last step is to measure about 1 cm and bend wire again using the pliers so that the wires are pointing downwards. Take a knife and rumors put it at the free end of the wire pointing down below the collar fasteners. You must ensure that the wide flat end of the rivets was along the blade. Now is the time to complete the buzz bait wire bending beneath the rivets, a right angle. Next, trim the wire so that it will extend no more than about ¼ inch from the bend below the rivets.

As you can see, the process of creating your very own home-made lures for bass fishing is not very difficult, you just have to be very careful and take things nice and slow. Read these steps over and over again until you do it right and some of his, save lots of money.

Read More >>