Many people are taking up the hobby of jewelry-making meeting. There are so many tools at their disposal a beginner at handmade jewelry that can be very confusing. There are however some basic tools you can use at the beginning, cost very little and will help you to create handmade jewelry that looks professional.
tools recommended in this article are for those who want to create your own beaded jewelry.
Tongs
There are an unlimited number of forceps are available, but do not have to have all of them but the beginning. Pliers are used to hold, shape and bend metal and wire.
Chain pliers
These are good all round essential set of pliers. They are ideal for crimping, opening jump rings, closing bead tips and holding small parts safely. Chain pliers have jaws that are smooth inside, round and taper to a point.
Flat pliers
These pliers with straight jaws on all sides, sharp corners and wide at the top. Flat nose pliers are used to flatten the wire, the spirals and sharp corners.
Round nose pliers
Another important set kliješta.Okrugla forceps were used to create the loop and wire wraps. Loop and wire wraps are used to attach the findings, such as earwires and accessories for your nakit.Petlje should be smooth without the rough edges and the calipers help you achieve that. These forceps should not be used to hold the stuff.
Crimping Pliers
These are not essential at first, but you May want to buy a crimping pliers after you commit to making jewelry as a hobby. They are specifically designed for closing crimp beads. They crunch wrap smoothly. You can use the chain nose pliers to close the crimp beads when you are starting out.
Bent chain pliers
pincers are curved and very pointed and are used for holding objects in particular cable or wire that is short or hard to reach places. They also help to open the thick gauge jump rings, giving a better use.
Coil Tongs
If you find that you have a problem in creating a good wire wraps or loops you can opt to invest in these pliers. They are designed to help you make consistent loops and coils. They are used by holding the wire with a flat jaw, and a rotating circle of jaws in the shape of the loop. But a few hours practice with round pliers, and some inexpensive fuse wire will help you get the sense wire wrapping.
Split Ring Pliers
These tend to be more expensive than a circle and chain clamp. This is a personal preference whether you need to have these pliers. They are designed to help you open the split ring.
Split rings are rings of little use to connect to your work there safely. Split ring pliers are not really necessary, because Split rings are usually made from thick wire. May they be necessary, however if you have dexterity problems or have long fingernails, and the value of your manicure.
Cutters
cutters used to cut wire and trimming jewelry findings.
Flush Cutters
Flush cutters are precision cutting, which will allow you to get close to your work. They can also be used to cut off the excess wire on the head and eye pins and provide orderly and safe finish. These cutters are better sidewire cutters as you can get much closer to the cut and so there is less chance of leaving a sharp edge. Inevitably more expensive.
Sidewire Cutters
Sidewire cutters have sharp jaws that will help reduce the chain of jewelry and beading wire. They allow you to cut closer to the work piece and cut the gap. They can also be used to cut off the excess wire on the head and eye pins and give a neat finish.
Memory Wire Cutters
Memory wire is very strong, hard wire. It is absolutely essential if you work with him to buy wire cutters made specifically to reduce the memory wire. You will damage ordinary thickets beyond repair, if you use them for cutting memory wire.
Various tools
bead board
beadboard is vital for the development and installation of necklaces and bracelets. Beadboards are usually made of molded plastic and have a flocked surface that helps to prevent balls from rolling about. They usually have a bead storage compartments and the rulers that you can use to measure your piece.
bead mat
If you want to make a great piece of beadboard that can not receive, or to work on a tray at knee then bead mat is essential. They are made of micro fiber and beads they stop in their tracks. This is very useful if you want to sort the beads that will stop them spilling all over.
Bead Reamer
Bead reamers are tools that are used to enlarge and clean bead holes, and smooth away rough edges.
Low Tack Tape
This is ideal for holding beads in place on a wire. Tape one end before you start to put the ball. It stays put, but when you remove the tape that leaves no sticky residue and does not flex beading wire.
As with any hobby, the initial costs can be astronomical. Jewelry is not an exception. You can limit spending in the beginning and still make exceptional peices of handmade jewelry.
Once you have done for a hobby, then you can build your collection of tools as much or as little as you please.
Tidak ada komentar:
Posting Komentar